Showing posts with label claymation. Show all posts
Showing posts with label claymation. Show all posts

Saturday, June 27, 2009

People mover!

Our resident machinist Scott Petrie (my dad) has just finished one of the coolest production pieces yet for Moving Day.
Introducing the "People Mover"!





If you've been following this blog for any length of time, you have probably heard me reiterate again and again the importance for having complete control over your character's movements. This typically means always having your character bolted to the ground to prevent any unintended movements.

"Ok," you might say. "That makes sense." But the first thing everyone wonders when they sit and think about animation for any period of time is, "Well wait a minute, what about when someone jumps in the air? How do you bolt them to thin air??"

Hmm, good question! Back in ye olde days of stop motion animation, characters were suspended in mid-air with very tiny fishing line. This is still used today in some animations, but most of the time the character is held up by something that is later photoshopped out. Often times this is called a "flying rig." We have called ours the People Mover and somehow the name just stuck:





Look ma, no ground contact!

This partially-finished armature was constructed with 1/4"-20 nuts in his upper back, lower back, and bottom of his butt. I can attach him to the People Mover in any of these locations and have him held 100% securely in place! Later on, after the animation is filmed, we will go back and edit out the bar so it looks like he is suspended in mid-air.

The ingenious design of this rig is of the first to come out of our armature / rigging machine shop run by none other than my father Scott Petrie. There was another famous team of father-son stop motion animators that made a pretty big impression on quite a few people... ever heard of a little guy by the name of Ray Harryhausen? If you don't think you have... you have, you just don't know it yet. Google it up.

Ray's dad was an accomplished machinist and designed a lot (if not all) of his armatures which Ray later animated and inspired nearly every special effects guru of our day. In the same way, my dad is currently building - well, that's a different story :-)

For now, take a look at these pictures of our awesome People Mover:

You can turn the crank for very precise movements along this plane:








This one is nice and long. Others may be shorter if the space is limited.









Notice the ball and socket joints. The sockets are designed to be the exact radius of the ball, providing maximum coverage for the most resistance with the smoothest movement. In other words, they aren't going to wear out for a long time and they will hold their tension very well.



There is a different type of joint for where the armature attaches to the arm, which makes it a breeze to attach this to a character.












Well, back to the shop to keep production rolling! It's a big set-design construction day over here. More to come soon.

-Duane

Read more!

Monday, June 22, 2009

Have a Seat, part three


The chair is finished!


You are going to have to forgive me for being a little sparse on details... First I was out of town for almost a week and then I was sick for even longer - so this post is a long time coming! I didn't take a lot of production pics because I just wanted to get it finished ASAP.



For those of you who enjoyed all the details, here is a quick rundown of what has happened since the last post.
  • Used epoxy putty on the feet to sculpt the shape and also affix a bolt to the bottom of the feet for attaching the chair securely to the set (see pic below)
  • Used "Goop" to glue the threading all over the chair. Yea, that's real threading from a fabric store.
  • Cut out balsa wood panels for the front of the arms. Stained them with walnut-covered wood stain.
  • Painted the feet with the same wood stain.
After that, the chair was finished!



And here is where the story gets a little sad, well for me anyway. This chair is supposed to look old and beat-up. Only problem is, it looks brand new. So, after having just made the chair perfect and beautiful, I went to town making it look "old" with the help of my sanding dremel and wood stain.
What do you think?

















-Duane


Read more!

Sunday, May 31, 2009

Have a Seat, part two




Chris's chair is almost finished now!


If you were to ask me what I liked better, sculpting or upholstering, you know what I would say? ...Probably nothing, because I would still be out in the workshop upholstering THIS CHAIR. In other words, UPHOLSTERY IS A MAJOR PAIN IN THE NECK! .... that being said, it's finally almost finished now :-)

By the end of last week's post, the chair looked like this:



After having a slight character modification, it turns out the back of the chair is going to be way taller than it needs to be. This calls for some major changes to the chair...
Now when something like this happens, it is easy to get frustrated. But it is also easy to realize that, in these instances, backtracking is actually moving forward and making progress.





Here I carefully cut and peeled away quite a bit of stuffing. After measuring and marking exactly where the new back should be, I very delicately cut the back with a small hand saw. Here is the new back height:





To make the arms rounded, I carved them out of styrofoam with my handy-dandy styrofoam cutter. If you like using the wire styrofoam cutters, more power to you - I cannot stand those things!







There is a special type of styrofoam glue I like to use. Lots of glues (and almost anything in an aerosol can) will melt styrofoam. I have read from our buddies Justin and Shel (they post comments as "Jriggity") that liquid nails works pretty well too. Here is the stuff I used:




It works unbelievably well sticking styrofoam to styrofoam, but it really doesn't work that well on anything else.




And now comes the fun part.... the upholstering!! I couldn't tell you how many glue sticks I went through attaching all this fabric, but the burns on my fingers can attest to the fact that I was using the glue gun like a madman on this thing. I love the character on these arms! I can see the wood needs to have quite a darker stain though...



What you can't see on the following picture is that both sides of the chair are actually one piece of fabric, connected by the small strip at the bottom on the front of the chair. I had to make it all one piece or the seam would seem out of place. Not easy, let me tell you!



I used a product called "Nufoam" to shape the front mattress. You can cut it easily with a big pair of scissors.


Wrapping up the foam...



After experimenting with a few things, I decided to go with a sharp edge for the side of the mattress. It will look a little funny until the trim pieces are added, but once they are it is really going to 'pop'.









Over the past few weeks, I have been keeping my eyes peeled for some gold studs everytime I walked through an arts store. Well, the other day I came across the perfect find! These studs were on clearance for a couple bucks and are supposed to fit with some little girl's clothing stud machine. Don't ask me.... but they are the pefect size.



Only problem: they look brand new. This chair is going to be very aged by the end of this process, and bright shiny gold studding would look very out-of-place.



So I painted them, one at a time, with a rusty metalic paint. Then I went back over and scratched them with a razor blade so a little bit of the original gold would show through. My cell phone camera is always out of focus, but you can get an idea of the difference from this shot:



And after adding the studs.....






And that's all for Part Two! It might not have seemed like much of a difference, but it was a lot of work!! Stay tuned for Part Three. There still needs to be a thick trim around the seams and the feet need to be sculpted. Then the entire thing needs to be aged. Here is a sample pic of what the trim will look like (this was edited in Microsoft Paint):



-Duane

Read more!

Tuesday, May 26, 2009

Have a Seat, part one

Have you ever built an armchair on a miniature scale? How about one that is designed for animation - that is, it is very sturdy yet very light? Well for Part One of this post, I will show you how I designed the frame of the chair to be extremely light yet sturdy enough to bolt a character to it. I will also show how I made the back stuffing. Part Two will cover the rest of the upholstering (coming soon).







If I've said it once, I've said it a thousand times: to animate smoothly you must have total control of your character. In other words, you need to have him bolted securely to your set whether he is standing, sitting, jumping, or even flying. You simply cannot have the character "accidentally" falling over or bending, even slightly, in a direction you didn't intend due to gravity. These minor things end up looking huge when you play your animation back and makes the character's movements jerky and not like natural life.



This poses an interesting dilemma for designing set pieces the character interacts with, like chairs. Our main character, Chris, does a lot of sitting (exciting guy, right?). This means that the chair is going to have to be designed in such a way that he can be bolted through the seat of the chair to make sure he doesn't move unless I want him to. At the same time, however, if the chair is going to "jump" in the air, it needs to be light enough to be held by one of our flying rigs. Light and sturdy is the name of the game!







This is, for all intents and purposes, the entire functional structure of the chair. That's everything! Four very sturdy legs and a tabletop made out of basswood. The legs will be bolted to the set and the character will be bolted to the top of the "table".

..... that was actually pretty easy to figure out. Now the hard part: the rest of the chair. I am going to use balsa wood as much as possible to keep it light. Notice the sides of balsa wood in the above picture.



To simulate "thick" arms, I am using two light pieces of balsa wood with a square wooden rod glued between them. I could use just the balsa wood (no wooden rods between them), but balsa wood is really fragile and as soon as I grab the arms to move it they would break and ruin it all. Here's another view:




Looking at the above photos, you will notice another rule of animation: cut any corners you can. Now I don't mean to be sloppy - I mean that if people aren't going to see it, don't sweat it! I was using wood glue on these pieces with reckless abandon..... but only because no one is ever going to see inside the chair :)


Just like the arms, I know the back of the chair is going to be under a lot of stress when people grab it and move it around. That's why I used a big piece of basswood for the back instead of balsa wood. A little heavier, but necessary for this part. I also put on the front panel (balsa wood):










The back looks a little thin, right? I am going to use the same technique I used with the arms to make it thicker, but this time it's different. The back needs to be rounded, that is, a bit convex to give it more realistic detail. To accomplish this look, I will make supports along the middle that are three rods thick and supports along the sides that are two rods thick. The balsa wood is flexible enough to bend around these supports. Lost? Check out the pic below:




Make sense yet? Look down on it from above:




See how they round off from the center to the sides? Perfect for bending the balsa wood around. I had to hand-sand these wooden pieces so they would be rounded to fit the balsa wood I am about to bend over them.




Here I am gluing the pieces to the back. Clay makes a great weight :)




The back is wider than a single slat of balsa wood so I need to glue two slats together. Here's a little tip for those of you who do not glue wood together very often: if you are gluing the end of a piece of wood to something (like the ends of these slats of balsa wood), the glue does not hold as strong. To get around this, spread a little glue on each end and let it dry ahead of time. That way when you glue the two pieces together, there is a little something for the glue to grab on to.That's what's happening in this picture:


Unfortunately, when I attempted to bend the (now glued together) piece of balsa wood around the supports, it cracked right next to the seam! The glue held perfectly, but the piece was breaking!! So out of one part frustration, two parts improvisation, I just duct-taped the pieces together. Viola.



After the back was attached - and essentially "thickened" - it was time for the upholstering. First, I marked out where each cushion will be. Then I used my handy-dandy spray glue to attach some un-rolled cotton balls to the fabric.

A small bead of hot glue along each line attaches the fabric to the chair. This fabric is green vinyl that looks just like leather under the camera. I bought a huge sheet of it from Joann's, a fabric store, for only $6!










After trimming the excess off the sides....


And adding the trim to the sides...



That's all for now! Next, we will add some styrofoam to the arms to give them a nice rounded look, and after that we simply wrap the vinyl all around the entire frame. It will look like a nice thick, heavy chair, but only you and I will know that it is actually light and hollow!


-Duane

Read more!